16
ControlLogix AC (10-265V) DC (5-150V) Isolated Relay Module
Publication
1756-IN513D-EN-P - November 2003
UL/CSA/FM ratings
Output rating: C300, R150 Pilot Duty (C300=240V ac,
2.5 A thermal continuous - 7.5A make, 0.75A break
@240V ac 50/60Hz.15A make, 1.5A break@120V ac
50/60 Hz 1800VA max make, 180VA max break;
R150=1A thermal continuous - 0.22A make/break @
125V dc 28VA max make/break)
Minimum Load Current
10mA/point
Initial Contact Resistance
100m
Ω
maximum @ 6V 1A
Switching Frequency
1 operation/3s (0.3Hz at rated load) maximum
Bounce Time
1.2ms (mean)
Expected Contact Life
300k cycles resistive/100k cycles inductive
Maximum Off-State Leakage
Current
0mA
Output Delay Time
OFF to ON
ON to OFF
13ms maximum
13ms maximum
Scheduled Outputs
Synchronization within 16.7 seconds maximum,
reference to the Coordinated System Time
Configurable Fault States/Point
Hold Last State, ON or OFF (OFF is the default)
Config. States in Program
Mode/Point
Hold Last State, ON or OFF (OFF is the default)
Fusing
Not protected - Fused IFM is recommended to protect
outputs (See publication 1492-2.12)
Isolation Voltage
Channel to channel
User to system
100% tested at 2546V dc for 1s
250V maximum continuous voltage
100% tested at 2546V dc for 1s
250V maximum continuous voltage
RTB Screw Torque (Cage clamp)
4.4 inch-pounds (0.4Nm) maximum
Module Keying (Backplane)
Software configurable
RTB Keying
User defined mechanical keying
Field Wiring Arm and Housing
36 Position RTB (1756-TBCH or TBS6H)
(1)
Conductors
Wire Size
Category
#22 to #14 AWG (0.324 to 2.08 sq. mm) stranded
(1)
3/64 inch (1.2mm) insulation maximum
1
(2)
Screwdriver Blade Width for RTB
1/8 inch (3.2mm) maximum