DeviceNet CompactPCI Communication Interface Card
25
Publication 1784-IN036B-EN-P - May 2001
5.
Set Baud Rate (125/250/500 kbs).
6.
Click
OK
. You see a dialog box that says Operation was successful followed
by a similar message box that tells you that Port “DeviceNet Port A” has
been configured.
Create View
To go online, follow these steps:
1.
From the
Setup
menu, select
Create View...
.
2.
Select
Port Names
.
3.
Select
Message Type (Input, Output, or Input/Output)
.
4.
Select
Privilege (Read Only, Read/Write)
.
5.
Click
OK
. You see a message box that tells you that Operation was
successful.
Scanner Mode
The Port Mode window displays the current mode of the scanner: Run, Idle, No
View.
Once you create a view, the Switch Mode button changes the mode between Run
and Idle.
