DeviceNet CompactPCI Communication Interface Card
27
Publication 1784-IN036B-EN-P - May 2001
Use the Device Status Screen
The Device Status screen displays an Idle/Failure Table where you can double-click
on a node to see its status, i.e., MAC ID, status code, and status info, e.g., device
stopped communicating.
If you double-click on an empty node, you see the response, “OK or not in scan
list.”
Interpret Status Indicators (LEDs)
The three status indicators on the card give you information about your network
and its connections. This figure identifies each status indicator.
The tables on pages 28 through 29 outline the indicator condition and the
corresponding status, and explain what each condition means to you.
30628-M
S
I/O Status Indicator
Module Status Indicator
Network Status Indicator