1–4
Introduction to StrataScan Bar Code Readers
Publication 2755-6.13
4.
Install the interface box.
Reference
Mount the interface box to your mounting surface after having attached the sensor/relay leads to the
sensor terminal block inside the interface box. Make sure that the 3 power leads from the interface
box power cord are connected to their correct locations on the power terminal block and grounding
posts terminals inside the interface box case.
Chapter 4
(Installing Your
Hardware)
Screw Holes
Screw Holes
Interface
Box
Interface
Box
Sensor Terminal Block
Sensor
Cable
Sensor housing
Power Terminal Block
To Power Receptacle
Power Cable
Grounding posts
Summary of Contents for StrataScan 2755-LHR-3C
Page 67: ...I 3 Publication 2755 6 13...