1–5
Introduction to StrataScan Bar Code Readers
Publication 2755-6.13
5.
Install the power supply.
Reference
Place the power supply (Catalog No. 77126–896–01) within 12 ft. (3.66 m) of the scanner.
Chapter 4
(Installing Your
Hardware)
6.
Connect the hardware components together.
Reference
If you are using an interface box, connect the reader, power supply and package detect to the
interface box. If you are not using an interface box, connect the reader to the host device and power
supply.
Chapter 4
(Installing Your
Hardware)
To PC (9-pin
connector)
To Reader (25-pin
connector)
Reader
Power
Supply
To Reader (9-pin
connector)
Grounding Pin
To Power Receptacle
7.
Apply power to the reader system.
Reference
After all your hardware components are installed and connected, apply power to the interface box
first, then your reader system.
Chapter 4
(Installing Your
Hardware)
Summary of Contents for StrataScan 2755-LHR-3C
Page 67: ...I 3 Publication 2755 6 13...