2–6
Hardware Features
Publication 2755-6.13
This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be
required to correct the interference at his/her own expense. Any
unauthorized changes or modifications to this equipment could void
the user’s authority to operate this device.
This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Industry Canada.
!
ATTENTION: Never attempt to look at the laser
beam, even if the scanner appears to be nonfunctional.
Doing so could result in hazardous laser light exposure.
!
ATTENTION: Use of controls, adjustments, or
performance of procedures other than those specified
herein may result in hazardous laser light radiation
exposure.
!
ATTENTION: Never open the scanner in an attempt
to look into the device or to service the laser scanner.
!
ATTENTION: The use of optical instruments with the
laser equipment will increase eye hazard.
!
ATTENTION: If it is necessary to disable the scanner
light emission, unplug the power supply’s AC power
plug from its AC power source.
Safety Information
Summary of Contents for StrataScan 2755-LHR-3C
Page 67: ...I 3 Publication 2755 6 13...
