Cable Pinouts
B–4
Publication 2755-6.13
Power Supply Port
1
5
6
9
Pin
Function
1
12V dc input power to the reader.
2
12V dc input power to the reader.
3
Earth ground
4
Power ground
5
Power ground
6
12V dc input power to the reader.
7
12V dc input power to the reader.
8
Power ground
9
Power ground
1
5
6
9
Pin
Signal
Function
1
Start of Scan
Synchronizes decode logic with the scanner.
2
Digitized Bar Pattern
Input receives a series of pulses proportional to the
widths of bar code being scanned from the hand-held
scanner.
3
Decode LED
Controls green decode LED on hand-held scanner.
5
Trigger Switch
Connected to trigger switch of the hand-held scanner
6
Enable
Signal output to power up the hand-held scanner, turn
on the laser, and turn on the scanning motor.
7
Ground
8
Shield ground
9
Power
+5V dc to power hand-held scanner
Note:
Place a female contact in pin 4 of the 9–pin hand–held
connector.
Hand–Held Port Pinouts
Summary of Contents for StrataScan 2755-LHR-3C
Page 67: ...I 3 Publication 2755 6 13...
