1A
OPERATIONS
1.19 Transporting Trowel
K
M
N
J
L
1A-17
Optional dolly jacks are available for short moves or to aid
in servicing the trowel. Install dolly jacks as follows:
1. Inspect dolly jack for serviceability and damage.
2. Place riding trowel on firm level ground.
3. With the front dolly jack (J) Fully insert extension
tube in the holes (K) in the mainframe of the
riding trowel. The front dolly jacks are equipped
with short lifting tubes while the rear dolly jacks have
long lifting tubes.
4. Insert the rear dolly jacks(L) with the long lifting
tubes into the holes provided in the rear of the
mainframe. The holes in the mainframe are located
directly opposite the front holes.
5. Turn jack handles clockwise to lift trowels and count-
er-clockwise to lower trowel.
CAUTION:
The dolly jack lifting system is designed for short moves
and to aid in servicing the trowel. It is not a substitute for
a towing system or trailer.
An optional lifting bridle (M) is available and recommend-
ed for lifting the trowel. Attach the bridle to each of the
four lifting eyes (N) on the trowel. Make sure the straps of
lifting bridle clear all sensitive components on the trowel
before lifting.
Summary of Contents for RAZORBACK RIDERS PRO1200C
