3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install the
product.
WARNING
• Follow the installation instructions carefully. Proper installation is the installer’s responsibility.
• Failure to follow correct installation procedures can result in the faucet being loose, which can
result in serious injury.
CAUTION
• Check local building codes before you begin installation to ensure compliance.
ASSEMBLY INSTRUCTIONS
1.
Shut off the water supply. Remove the old faucet.
Clean the mounting surface. Ensure the gasket (B)
is on the bottom of the new faucet (A). Place the
faucet (A) through the mounting holes in the sink.
NOTE
: If the sink is uneven, use silicone under the
gasket (B).
PREPARATION
Before beginning the assembly of this product, make sure all parts are present. Compare parts with
the package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly Time:
35 minutes (including removal of old faucet)
Tools Required for Assembly (not included): Adjustable Wrench, Silicone sealant
Helpful Tools (not included): Safety Goggles
1
A
B
