4b.
OPTIONAL: If you want to use the faucet without the
sensor feature or without power, you can attach the
quick connector (1) to the receiving block (2). This
bypasses the sensor feature and enables the faucet
to work by operating the handle.
5.
To open the battery housing, squeeze the tabs (1) on
the cover (2), then remove the cover (2). Install the
four AA batteries (M) included by matching the positive
(+) and Negative (-) ends on the battery (M) to the (+)
and (-) markings in the battery pack (N). The negative
ends of the battery (M) should always connect to the
spring end of the battery slots in the battery pack (N).
Reinstall the battery pack cover (2) by pushing up and
snapping into place.
This step is for battery installation (optional). If the
battery will not be used, install as described in step 7.
NOTE:
When the sensor flashes 10 times
continuously and slowly, the batteries have
lost their charge. Replace the batteries (M).
ASSEMBLY INSTRUCTIONS
6
4b
+
-
-
+
+
-
-
+
2
+
-
+
+
-
-
3
4
4
1
5
5
M
N
2
1
2
N
1
2
