Lowes.com/allenandroth
ASSEMBLY INSTRUCTIONS
5
4.
Pass fixture (A) over the long machine
screws (DD) protruding from the mounting
bracket (B) and then secure with threaded
knobs (CC).
3.
Mounting surface should be clean, dry, flat
and 1/4 in. larger than the fixture (A) on all
sides. Any gaps between the mounting
surface and fixture (A) exceeding 3/16 in.
should be corrected as required With silicone
caulking compound (not included). Caulk
completely around where back of fixture (A)
meets the wall surface to prevent water from
seeping into outlet box.
x 2
CC
Threaded
Knob
Hardware Used
A
3
4
B
DD
CC
A
C
5
5.
Insert bulb (not included) into socket (D).
Use 100-watt max. medium-base
incandescent bulb or a CFL equivalent.
