ASSEMBLY INSTRUCTIONS
5
Remove mounting plate (B) from fixture (A) by
removing mounting plate screws (C) from the
fixture (A).
Save mounting plate screws (C) for later use
.
Attach mounting plate (B) to outlet box (not
included) using existing washers and outlet box
screws or the machine screws (BB).
NOTE
: If the
outlet box screws required for your outlet box are
of a different size than the machine screws (BB),
consult a licensed electrician before proceeding.
Tighten machine screws (BB) to secure mounting
plate (B).
Note:
Mounting plate (B) can be installed either
vertically (shown) or horizontally.
CAUTION:
Make sure the outlet box can
support 35 lbs. hanging weight. Use
metal
outlet
box; plastic outlet boxes are not recommended.
3.
4.
Hardware Used
Machine Screw
x 2
BB
4
Outlet Box
B
BB
BB
B
3
A
C
C
