background image

Printed In China

8

KHLI1712

CARE AND MAINTENANCE

 

Shut off main power supply. Wipe with soft cloth or use window cleaner. Do not use an abrasive 

cleaner.

WARRANTY

The distributor warrants all of its lighting fixtures against defects in materials and workmanship for 
five (5) years from the date of purchase. If within this period the product is found to be defective, take 
a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of 
purchase. The distributor will, at its option, repair, replace or refund the purchase price to the 
consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This 
warranty does not cover fixtures becoming defective due to misuse, accidental damage or improper 
handling and/or installation and specifically excludes liability for direct, incidental or consequential 
damages, improper packaging of returned products and acts of God. As some states do not allow 
exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply. 
This warranty gives you specific rights and you may also have other rights which may vary from state 
to state.

Light does not come on
initially or no longer
comes on.

Fuse blows out or
circuit breaker trips.

1. Power is OFF.
2. Faulty connection.
3. LED component is not working
    properly.

1. Crossed wires.
2. Power wire is grounding out.

1. Check wiring.
2. Check all connections.

1. Make sure power supply is ON.
2. Check wiring and all connections.
3. Contact Customer Service.

  PROBLEM 

          POSSIBLE CAUSE 

CORRECTIVE ACTION

TROUBLESHOOTING

WARNING: 

Before beginning work, shut off the power supply to avoid electrical shock.

Summary of Contents for VBL12-12BNK









Reviews: