ASSEMBLY INSTRUCTIONS
6
Remove mounting plate (B) and from fixture (A)
by removing rubber washers (F) and mounting
plate screws (C) from the edges of the fixture (A).
Save mounting plate screws (C) and rubber
washers (F) for later use
.
Attach mounting plate (B) to outlet box
(not included) using existing washers and
outlet box screws or the machine screws
(BB).
NOTE
: If the outlet box screws
required for your outlet box are of a different
size than the machine screws (BB), consult
a licensed electrician before proceeding.
Use a level (not included) to adjust mounting
plate (B) so mounting plate (B) is parallel
with floor and ceiling as needed. Tighten
machine screws (BB) to secure mounting
plate (B).
CAUTION:
The fixture must be mounted
to an outlet box that is supported by the
building structure and can support the
weight of the fixture. Plastic outlet boxes are
not recommended.
3.
4.
Hardware Used
Machine Screw
x 2
BB
B
A
C
C
3
4
B
Outlet Box
BB
BB
F
