1.29
CONFORMITY
OF
DECLARATION
EC DECLARATION OF CONFORMITY
Manufacturer: HAYTER LIMITED,
Address: Spellbrook, Bishop’s Stortford, Herts. CM23 4BU. ENGLAND
declare that the trimmer
:
Model
name:
Model No:
Cutting width:
Speed of rotation of the cutting device:
Engine Manufacturer:
Speed of rotation of engine:
Hovertrim
CODE 180E
46 cm
3400 rpm
Honda
3400 rpm
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements.
Relating to the Design & Construction of Machinery and Safety Components, as amended and the regulations
transposed into national law.
Also Directive 2004/108/EC Electromagnetic Compatibility and the regulations transposed into national law.
Complies with harmonized standards: EN 14910, EN 14982.
NOISE INFORMATION
The noise levels measured in accordance with
European Standard EN 14910
Machine sound power level:
Sound level at operatorʼs ear:
Declaration done and technical
documentation kept at:
HAYTER LIMITED
Spellbrook, Bishop’s Stortford,
Herts. CM23 4BU ENGLAND
98 dB(A)
85 dB(A)
Date: 02.03.2007
Authorised Signatory:
Mr. S. A. Maryniak
Vibration Information
The vibration level at the operator contact positions, measured in accordance with European Standard EN 836.
CODE 180E – 5.59 ms
-2
Operators Daily Personal Noise Exposure:
HAYTER LIMITED have no control over site conditions, duration of use, state of maintenance or adjustment of the mower. All
these factors will affect the operator’s daily personal noise exposure level – LEP,d. Under typical working conditions operators
could be exposed to a daily personal noise exposure level in excess of 85 dB(A) LEP,d.
If hearing protection is required, ear protectors with good attenuation in the 63 – 8000 Hz frequency range should be used.
Employers of personnel using this machine are advised to read “The Control of Noise at Work Regulations
2005” as the operator’s daily personal exposure level could be above the ‘First Action Level’.
111-2596 (A) 23/7/08 3:28 pm Page 1.29
