1A
OPERATIONS
THE INFORMATION CONTAINED IN THIS MANUAL WAS BASED UPON THE MACHINES
IN PRODUCTION AT THE TIME (BEGINNING WITH SERIAL NUMBER
6001207002
) OF
PUBLICATION. ALLEN ENGINEERING CORPORATION RESERVES THE RIGHT TO
CHANGE ANY PORTION OF THIS DOCUMENT WITHOUT NOTIFICATION.
Information Contained in This Manual
Ordering Parts
This manual contains an illustrated parts list for help in ordering replacement parts for your machine. Follow
the instructions listed below when ordering parts to ensure prompt and accurate delivery. All orders for parts
must be made through your local authorized Allen Engineering dealer. All authorized Allen Engineering deal-
ers must fax a copy of the parts order to customer service. The fax number is (870-236-3934). Facsimile orders
must contain the following information:
Keep this manual or a copy of it with the machine. If you loose this manual or need an additional copy
please contact your Allen distributor or Allen Engineering Corporation at (800) 643-0095 and order lit-
erature part number 048771.
©
2007 Allen Engineering Corp.
All Rights Reserved -- Contents
Subject to Change Without Prior
Notice.
This manual provides information and procedures to safely operate and maintain the Allen
®
HDX600-44KBTD
Model Riding Trowel.
For your own safety and protection from personal injury carefully read, understand and observe the safety
instructions described in this manual.
Always operate and maintain this machine in accordance with the instructions described in this manual. A well
maintained piece of equipment will provide many years of trouble free operation. This manual is divided into the
sections listed below.
1A-5
1
. On all orders for service parts include SERIAL NUMBER and MODEL number.
2
. Shipment may be delayed if this information is not included.
3
. Include correct description and part number from part section 2A.
4
.
State exact shipping instructions including preferred routing and complete destination address.
Also please indicate your preferred freight carrier. If no freight carrier is indicated Allen Engineering
reserves the right to ship the shipment the best way possible. Once a shipment leaves Allen
Engineering’s docks it becomes the responsibility of the freight carrier to insure that it arrives at it’s
intended destination.
5
.
DO NOT
return parts to Allen Engineering without receiving written authorized Customer Service
Report(CSR) from Allen Engineering. All authorized returns must bee shipped prepaid.
All unauthorized
returns will be shipped back to the addressee at their expense.
1A
OPERATIONS
2A
PARTS
