AOC P/N 033-0090
2
Rev.
10/99
III. GETTING AROUND THE FRONT PANEL
UP & DOWN buttons: These controls are used to change all of the function settings
(PRESET, DIV, VOICE, etc.). To change a function setting, press the desired function
button and then use the UP or DOWN button to change the setting within that function. To
save the changes, press the SET button of the MDS-Expander™ II and then press its
PRESET buttons.
NOTE:
with the exception of MIDI functions and tuning, changes in
MDS-Expander™ II settings will only affect the current group preset. MIDI and tuning
settings are “global” and do not need to be changed for each preset.
PRESET button: Moves line cursor to
PRESET
sector of display. Subsequent use
selects next preset group number.
DIV button: Moves blinking cursor to the arrow which points to a specific
DIVISION
sector
of display. Subsequent use selects next division.
VOICE button: Moves blinking cursor to first letter of the
VOICE
of the selected division.
Subsequent pressing selects the next voice in MDS-Expander? II voice list for that
division.
TREM: Changes the tremulant status of a selected division voice and displays a
À
when
tremulant is turned on. (Note: Tremulant can be added only to voices where tremulant is
appropriate.)
IV. MODIFYING A MDS-EXPANDER™ II PRESET
1. Select desired preset: press PRESET, then UP or DOWN
2. Select division for modification: press DIV, then UP or DOWN
3. Select desired voice: press VOICE, then UP or DOWN
4. Set desired tremulant status: select desired voice, press TREM
5. Save settings: press SET, then PRESET
EXAMPLE: To change the voice assigned to a division, press the DIV button and use the
UP or DOWN button to move the flashing cursor to the desired division. Press the VOICE
button and use the UP or DOWN button to select the desired voice. To change the
tremulant status of the voice, press the TREM button. To save changes as part of the
current preset, press the SET button and then press the PRESET button.
V.
RESTORING
FACTORY
PRE-PROGRAMMED
SETTINGS FOR PRESETS
Use the following procedure if it becomes necessary or desirable to restore the Allen
Organ Company factory pre-programmed settings for presets and MIDI functions.
With the MDS-Expander™ II’s power turned OFF, press and hold the PRESET and DIV
buttons simultaneously. While holding the PRESET and DIV buttons turn the power on.
This procedure will restore all factory preset, MIDI, and tuning settings.