Operating and Maintenance Manual
REPLACING UV BULB
ONE YEAR LIMITED WARRANTY
Your AllerAir unit comes with a 1-year limited warranty excluding expendable parts such as pre-filters
and filters. This warranty provides for the repair of any defective components and labor for 1 year
from the date of delivery. This warranty does not cover damage, fault or failure due to alteration or
repairs made by anyone other than AllerAir or the use of supplies and acccessories other than those
manufactured by AllerAir. Any damage or lack of performance due to or found to be caused by
saturated filters as per AllerAir inspection voids the warranty. This warranty is provided to the original
purchaser and may not be transferred. A return authorization number is required for warranty repairs.
Please contact AllerAir at 1-888-852-8247 for more information.
1.888.852.8247
www.allerair.com
A-0088-3-UV
STEP 2
Gently lay unit upside down. With
a screw driver, remove all 4 screws.
STEP 3
Remove lid by pulling slightly on
cover.
STEP 1
Turn power off and
unplug receptacle.
STEP 5
Remove UV bulb visible in center
of base.
STEP 6
Gently screw in new UV bulb.
STEP 4
First remove HEPA filter and then
carbon filter by placing your hand
on the inner side of the filter. Pull
gently until completely removed.
STEP 7
Replace all filters .
STEP 8
Place lid back to its proper
position by aligning screw holes.
STEP 9
With a screw driver, place the 4
screws back into their positions.
