8
4.2 Unfolding the upper handle bar
1) Unfold and align holes in both handle bars
2) Pass the tie bar through the holes and secure with the plastic wing nut
3) Tighten both wing nuts each side by hand
4.3 Unfold the lower handle bar
1) Use 2 x 13mm spanners to undo both the lower M8 Nyloc nuts
2) Move the lower handle bar into a comfortable position for the operator
3) Secure the M8 fasteners in the appropriate hole (tighen to approx 30Nm)
4.4 Attaching the cable clips
Make sure all cables are securely fastened to the handlebars using the cable
clips provided
1
2
3
x4
