ALL
FASTENERS.COM
|
20
NOTE:
The information contained in this manual is designed to assist you in the safe maintenance of the AFGN50 ProTrax
Nailer.
Some illustrations in this manual may show details or attachments that differ from those on your own nailer.
MAINTENANCE AND INSPECTION
Read section titled “2. SAFETY WARNING” before operating tool.
DANGER
Never use and test in presence of flammable liquids or gases.
Keep away from ignition source
No smoking.
()
24. MAINTENANCE & INSPECTION
WARNING
Remove fuel cell, battery and all nails from nailer when 1) Daily cleaning, 2) Maintenance and inspection or 3) Clearing
a jam.
1.
Daily Cleaning
Must regularly clean nailer including removal of the internal accumulation of smears, carbon and dust. This will help ensure the
normal operation of tool and extend nailer working life. Cleaner sold separately.
Follow the AFGN50 ProTrax Tool Cleaning & Maintenance Guide, which include steps and methods to clean the AFGN50 ProTrax
Nailer.
AF Gas Nailer cleaning time intervals depends on the nailer operating environments and the firing quantity of nails per week.
If using in a dirty environment full of debris ad firing large quantities of nails per week, nailer cleaning intervals will be shorter.
Below is the cleaning intervals table for reference. If according to the cleaning time intervals, you still find the nailer is extremely
dirty, the cleaning intervals should be shortened. If you find the nailer is very clean, extend cleaning time intervals.
CLEANING TIME INTERVALS
FIRING QUANTITY PER WEEK
OPERATION ENVIRONMENT
VERY DIRTY
DIRTY
COMMON
CLEAN
1000
1 Week
2 Weeks
1 Month
2 Months
2000
1 Week
2 Weeks
1 Month
1.5 Months
4000
1 Week
2 Weeks
3 Weeks
3 Weeks
6000
1 Week
1 Week
2 Weeks
2 Weeks
8000
1 Week
1 Week
2 Weeks
2 Weeks
NOTE: After completion of each cleaning, user must drip lubricant oil on nailer in places indicated in the AFGN50 ProTrax Nailer Tool Cleaning & Maintenance
Guide. If you have further questions pertaining to the cleaning, operating procedures and methods of the AFGN50 ProTrax Nailer, contact Allfasteners, LLC.
at 1-800-577-3171.
2.
Inspecting the magazine.
REMOVE FUEL CELL AND BATTERY.
Clean the magazine. Remove the dust which may have accumulated in the magazine.
Lubricate it with the proper designated lubricant oil (Sold Separately).
CAUTION
Check that the nail feeder slides smoothly by pulling it with your finger. If it does not slide
smoothly, nails can be driven at an irregular angle and cause injury.
