ALL
FASTENERS.COM
|
21
()
24. MAINTENANCE & INSPECTION (CONT’D)
3.
Storage of Nailer and Equipment
DANGER
Store nailer properly with nails, fuel cell and battery removed.
The fuel cell is an aerosol dispenser containing flammable contents.
When not in use, the nailer, fuel cell and battery should be stored in tool case. Tool case should be stored in a dry place
indoors and in temperatures between 41°F (5°C) - 77°F (25°C).
When not in use for an extended period, apply a thin coat of lubricant to the steel parts to avoid rust.
DO NOT store nailer, fuel cell and battery in a cold weather environment.
Keep nailer and all parts out of the reach of children.
4.
WARNING LABEL
Change the WARNING LABEL if missing or damaged. A new WARNING LABEL is available from the dealer.
5.
Maintenance Chart
6.
Operator Troubleshooting
See section “25. Troubleshooting” located on page 21.
CAUTION
Repair, modifications and inspections of AF Gas Nailer must be carried out by an authorized dealership or technician.
In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
MODIFICATIONS
AF products and power tools are constantly being improved and modified to incorporate the latest technological advancements.
Accordingly, some parts (i.e. part numbers and/or design) may be changed without prior notice.
SERVICE AND REPAIRS
CAUTION
Only service personnel trained by the distributor or employer shall repair the nailer.
Use only parts supplied or recommended by Allfasteners for repair.
All quality nailers will eventually require servicing or replacement of parts due to wear form normal use.
NOTE:
Specifications are subject to change without any obligation on the part of Allfasteners, LLC.
CONTACT/MANUFACTURER
If your AFGN50 ProTrax Nailer is malfunctioning, needs repair or replacement parts, please contact Allfasteners, LLC. by calling
1-800-577-3171 for more information. Allfasteners will be available to recommend course of action for replacement, repairs and
authorized dealers/technicians.
ACTION
WHY
HOW
Clean magazine and feeder mechanism.
Prevent a jam.
Daily cleaning.
Keep push lever working properly.
Promote operator safety and efficient nailer operation.
Daily cleaning.
Make sure all screws are tightened.
Avoid the nailer being damaged and ensure safety.
Periodical inspection.