ALL
FASTENERS.COM
|
4
4. GENERAL WARNINGS (CONT’D)
13. PLACE NAILER PROPERLY ON WORK SURFACE.
Do not drive fasteners on top of other fasteners or with the nailer at too steep of an angle. The fasteners could
ricochet and cause injury.
14. DO NOT DRIVE FASTENERS INTO THIN BOARDS OR NEAR CORNERS AND EDGES OF WORK SURFACE.
By doing so, the fasteners could be driven through or away from the work surface and cause injury to operator or others.
15. NEVER DRIVE FASTENERS FROM BOTH SIDES OF A WALL AT THE SAME TIME.
By doing so, the fasteners could be driven into and through the wall causing injury to operator or others on opposite side of wall.
16. CHECK FOR LIVE WIRES.
Avoid the risk of severe electrical shock by checking for live electrical wires that may be hidden by walls, floors or ceilings. Turn off
the breaker switch to ensure there are no live wires.
17. DO NOT OVERREACH.
Keep proper footing and balance at all times. Do not operate the nailer while on scaffolding or ladders.
18. NEVER USE NAILER WHICH IS DEFECTIVE OR OPERATING ABNORMALLY.
If the nailer appears to be operating abnormally, making strange noises or otherwise appears to be defective, stop using it
immediately and call Allfasteners, LLC. at 1-800-577-3171 for further instructions.
19. TAKE FUEL CELL AND BATTERY OUT OF NAILER WHEN:
1) Doing maintenance and inspection; 2) Clearing a jam; 3) It is not in use; 4) Leaving work area; 5) Moving it to another location;
6) Handing it to another person
Never attempt to clear a jam or repair on the nailer unless you have taken fuel cell and battery out of the nailer as well as removed all
remaining fasteners from tool. The nailer should never be left unattended with people who are not an authorized operator. By doing
so, risk of injury is higher.
20. KEEP ALERT.
Operate the nailer only in good physical and mental state. Do not operate the tool when you are tired, under the influence of
alcohol, drugs or medication that may make you drowsy.
21. HANDLE NAILER CORRECTLY.
Operate the nailer according to this manual. Never allow the tool to be operated by children, individuals unfamiliar with its operations
or unauthorized personnel.
22. NEVER USE THIS TOOL FOR APPLICATIONS OTHER THAN THOSE SPECIFIED IN THIS MANUAL.
See section 11.
23. HANDLE GAS NAILER CAREFULLY.
Do not drop the nailer or strike it against hard surfaces. DO NOT scratch or engrave nailer. Handle tool with care.
24. MAINTAIN NAILER WITH CARE.
Keep the nailer clean and lubricated for more efficient and safe performance.
25. USE ONLY PARTS, ACCESSORIES OR FASTENERS SUPPLIED OR RECOMMENDED BY ALLFASTENERS.
Unauthorized parts, accessories or fasteners may void your warranty and can lead to malfunction or result in injury. If tool requires
service or repair, contact Allfasteners, LLC at 1-800-577-3171 for further instructions.
26. NEVER MODIFY OR ALTER TOOL.
Doing so may cause it to malfunction and personal injuries may occur.
DANGER
FUEL CELL, FUEL AND PROPELLANT ARE FLAMMABLE UNDER PRESSURE.
