Instructions for starting the
Steakzone® and the Backburner
First of all, it takes a little more time and
patience to start a ceramic burner than a
stainless steel burner! (because the gas has
to develop under the ceramic)
But when the burner develops its full power, it is
more powerful than the conventional stainless
steel burners.
Check all gas connections for leaks before each
use. Have you connected all the ignition cables
correctly and are they undamaged? Are the
distances between the electrodes and the ceramic
burner correct and can the ignition spark be
seen? (white-blue flash)
Steakzone
®
STARTING THE CERAMIC
BURNER STEAK ZONE
®
When starting the ceramic burners, please
always make sure to hold down the gas supply
regulator at full power for 5 seconds before
ignition in order to enrich the ceramic with gas.
Then ignite and hold down again for 5 seconds!
If no flame is visible, please repeat this
procedure.
Backburner - ceramic burner
Electrode gap for
ignition 8-9 mm!
(Steak zone and
backburner)
Summary of Contents for 100303
Page 9: ...3 Grill cart side wall assembly No Ϯϰ н Ϯϲ Ϳ 4 Grill cart back wall assembly No Ϯϯ ...
Page 10: ...5 Front door strut assembly No Ϯϱ ϲ Fixing the firebox and the grill cart with screws 10 ...
Page 14: ...1Ϯ Flame cover No ϭϭ 1ϯ rill grate ϯϬϬ x ϰϲ0 mm Ϯdž No 2 н ϯ ...