Installation
7
801455
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Sink Installation
For this type of installation, use the beaded tie-down
strap (supplied in accessories bag) or use a large wire
tie (available from your local hardware store), and
secure the drain hose to the cabinet top hinge (refer to
Figure 7
). This will prevent the drain hose from
dislodging during use.
Figure 7
In-the-Wall Installation
For installations of this type, the drain hose MUST be
secured to one of the fill hoses using the beaded tie-
down strap from accessories bag.
NOTE: End of drain hose must not be below 24 in.
(61 cm).
Figure 8
FLW1959N
1
24 in. to 36 in. (91.44 cm recommended
height)
2
Standpipe 2 in. (5.08 cm) or 1-1/2 in. (4 cm)
3
Beaded Tie-Down Strap
Figure 6
FLW1960N
1
Drain Hose
2
Tie-Down Strap (Wire tie or tape if
necessary)
FLW1959N
1
2
3
FLW1960N
1
2
H023I
1
Drain Hose
2
Tie-Down Strap (Tape if necessary)
3
Fill Hoses
2
3
1
