88
33711
Section 8 Service Procedures Unique to the Electronic Control Model Washers
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
73. SYMPTOM: WASHER WILL NOT SPIN PROPERLY
Washer will not
spin properly?
Broken, loose or incorrect
wiring?
YES
NO
YES
Correct wiring.
Loading Door Switch
120 Volts between terminal “N.O.”
on motor relay K3 and “P1”
(neutral) with loading door closed
and power cord plugged in?
Motor Relay K3
120 Volts between terminal “COM”
on motor relay K3 and “P1”
(neutral) on control?
YES
Motor Relay K1
Zero Volts between terminals “P2”
(START/AGITATE) and “P1”
(neutral) on control?
Motor Relay K2
120 Volts between terminals “P3”
(START/SPIN) and “P1” (neutral)
on control?
YES
Problem is not related to
electronic control.
NO
Inspect loading door
switch.
NO
Replace control.
Choose cycle and press GO pad.
Advance cycle to SPIN.
YES
NO
Replace control.
YES
NO
Replace control.
