Operation
17
803447
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 6: Start Washer
After vend price has been satisfied, push the
START
pad. DOOR MUST BE CLOSED TO START
WASHER.
Figure 20
Indicator Lights
WASH
WASH
is lit at the beginning of a wash cycle and will
remain lit until the wash cycle is complete.
RINSE
RINSE
is lit at the beginning of all RINSE cycles and
will remain lit until the rinse cycle is complete.
SPIN
SPIN
is lit for all spin cycles.
DOOR LOCKED
DOOR LOCKED
is lit whenever the door is locked.
The door cannot be opened when this light is on.
START
START
flashes one second on and one second off when
the full vend price has been satisfied.
IMPORTANT: If washer fails to operate properly
after installation, make sure electrical service and
water supply faucets are turned on. Are all the
controls properly set? Have a qualified service
person refer to the wiring diagram (located inside
of washer control cabinet) and check for broken,
loose or incorrect wiring.
NOTE: Once a cycle has started, the door can only
be opened by first unplugging the power cord and
waiting one minute.
FLW2243N
FLW2243N
To reduce the risk of bodily injury, do not
remove laundry from washer until all
lights are out, and all moving parts have
stopped.
W092
WARNING
