Alliance Laundry Systems FLW1548C SVG, User Manual

Troubleshooting

Try these troubleshooting tips before making a service call. They
may save you time and money.

Washer Symptom

Possible/Cause Solution

Won't Fill

• Make sure power cord is plugged all the way into the electrical

outlet.

• Make sure hot and cold water faucets are turned on.
• Make sure that the fill hoses are not kinked or twisted.
• Press Start/Pause button to start washer.
• Make sure that the controls are properly set.
• Make sure that the loading door is closed tightly.
• Check the laundry room fuse or circuit breaker.
• Clean the screens in the water mixing valve and the filter

screens located at the faucet end of the fill hoses. (Owner is
responsible for service calls regarding cleaning of the screens.)

Won't Start

• Make sure that the loading door is closed tightly.
• Press Start/Pause button to start washer.
• Make sure power cord is plugged all the way into the electrical

outlet.

• Make sure that the controls are properly set.
• Check the laundry room fuse or circuit breaker.
• Make sure door latch is properly adjusted relative to door lock.

Won't Spin/Tumble

• Make sure that the loading door is closed tightly.
• Press Start/Pause button to start washer.
• Make sure power cord is plugged all the way into the electrical

outlet.

• Make sure that the controls are properly set.
• Check the laundry room fuse or circuit breaker.
• Broken drive belt. Call the service person.
• Foreign object trap in pump may be clogged. Clean the trap. Re-

fer to Maintenance section.

Stops/Pauses During Cycle

• Pauses are part of the washer’s normal operation.
• Check the laundry room fuse or circuit breaker.
• Wash load may be unbalanced. Washer will stop and then re-

start spin automatically. If the washer is severely unbalanced,
press the Start/Pause button and redistribute the load.

Won't Drain

• Make sure drain hose is not kinked or twisted.
• Make sure drain hose is not clogged.
• Make sure drain receptacle is not clogged.
• Refer to the Installation instructions to make sure that the

drain hose has been properly installed.

• Foreign object trap in pump may be clogged. Clean the trap. Re-

fer to Maintenance section.

Troubleshooting

  Part No. 805002ENR3

©

 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT

  20