background image

WARNING

Failure to install, maintain, and/or operate this ma-

chine according to the manufacturer's instructions

may result in conditions which can produce bodily in-

jury and/or property damage.

W030

WARNING

For your safety and to reduce the risk of fire or an ex-

plosion, do not store or use gasoline or other flamma-

ble vapors and liquids in the vicinity of this or any oth-

er appliance.

W022

NOTE: The WARNING and IMPORTANT instructions ap-

pearing in this manual are not meant to cover all possi-

ble conditions and situations that may occur. It must be

understood that common sense, caution, and careful-

ness are factors which cannot be built into these wash-

ers. These factors MUST BE supplied by the person(s)

installing, maintaining, or operating the washer.

Always contact the distributor, service agent, or the manufacturer
about any problems or conditions you do not understand.

Read all instructions before using washer.

Capacity Specifications

These units are sold in various countries worldwide, many with dif-
ferent requirements for measuring the machine's capacity. The in-
formation below shows some of the accepted types of measure
posted on this product.

Dry Linen Capacity: A measure of weight that defines the maximum
load size that can physically be placed into the drum.

Wet Linen Capacity: A measure of weight that defines the maximum
load size that can physically be placed into the drum with 50%
moisture.

IEC Capacity: A measure of weight that defines the maximum ca-
pacity of dry linens and textiles which the manufacturer declares is
able to be washed or dried in a specific cycle.

Dry Linen Capacity

10.5 kg [23 lb.]

Wet Linen Capacity

15 kg [33 lb.]

IEC Capacity - Country and
Model dependent

7.5 kg [16.5 lb.] to 10.5 kg
[23 lb.]

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  3

  Part No. 203963ENR2

Summary of Contents for Speed Queen LWN311SP101NW22






















Reviews: