Alliance Laundry Systems TC5102WN, User Manual

4.  Close the lid. The washer will not fill, agitate or spin with

the lid open.
 

TLW2324N_SVG

WARNING

To reduce the risk of serious injury, do not by-
pass the lid switch to permit the washer to agitate
or spin with the lid open.

W898

5.  Set the WASH TEMPERATURE control. (All rinses are cold.)
6.  Select OPTIONS if desired.
7.   Select the cycle according to the type of fabric being wash-

ed. Refer to 

Determine Proper Cycle

. If the selected cycle is

not the correct cycle for the fabric being washed, you may
change the cycle selection at any time until the first wash
fill is complete.

IMPORTANT: Once the first wash fill is complete,
changing the Cycle Selection knob will have no ef-
fect.

NOTE: The Normal Eco cycle is recommended for
everyday cottons and linens.

8.  Press the START/PAUSE button to begin the cycle.

NOTE: Lid must be closed for fill, agitation and spin
to start.

The washer will stop (pause) shortly before the wash and rinse
spins. This is a normal part of the cycle.

 Pausing the Cycle

Lifting the lid or pressing the Start/Pause button will pause
the cycle. Close the lid to resume the cycle.

You can change the cycle during the first wash fill only. You
can also pause the cycle after the first fill but the cycle selec-
tion can't be changed at this time.

NOTE: You can’t pause a cycle right after starting it.
There is a short delay while the machine is energizing.

1.  To pause a running cycle, open the lid or press the Start/

Pause button once. The current Status light will go out.

2.  The Start/Pause Status light will flash to indicate the cycle

is paused.

3.  Close the lid, or if lid was not previously opened press the

Start/Pause button again, to resume the cycle. It will start
from the place it was in the cycle when paused. You can't
change the cycle selection while it is paused.

 Canceling the Cycle

You can change the cycle during the first wash fill. If you need
to change the cycle after that you must cancel it first.

1.  To cancel a cycle, hold the Start/Pause button for three

seconds. The WASH, RINSE and SPIN Status lights will
flash. An audio tone will sound.

2.  You can now change the cycle type, if desired. For example,

you may want to change it from HEAVY DUTY to DELICATE
depending on the type of clothes being washed.

3.  Press the Start/Pause button to start the new cycle.

Operating Your Washer

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  12

  Part No. 204954EN