HCA, HCD, HCE, HCH, HCJ and HCU Models with
N and W Controls
CHM1795C_SVG
>
>
>
Rinse
Wash
Insert
Coins/Card
Spin
Door
START
+
+
Figure 61
1. Press the Normal 90C, Normal 60C, Normal 40C, Perm Press
90C, Perm Press 60C, Gentle 30C or Perm Press 50C keypad
to choose the desired cycle/temperature. The corresponding
LED indicates the selection.
2. Press the Extra Wash and/or Extra Rinse keypads to add
modifiers to the cycle. The corresponding LEDs indicate the
added modifiers.
3. Insert coin(s) or card as necessary.
• If the machine is a coin operated unit, add coins. As each
coin is added, the vend counts down to the amount re-
maining.
• If the machine is a card operated unit, insert and remove
card per card system instructions.
• If the unit is interfaced to a central/remote pay system, go
to the central/remote pay console, make payment and se-
lect the machine and follow central/remote pay system in-
structions.
4. Add liquid and/or powder supplies to supply dispenser. Refer
to
Table 44
.
a. Detergent:
• Liquid - Compartment 1 (prewash) + Compartment 3
• Powder - Compartment 1 (prewash) + Compartment 2
b. Bleach:
• Liquid - Compartment 3
• Powder - Compartment 2
c. Softener:
• Liquid - Compartment 4
5. Press the START (enter) keypad to select.
NOTE: Cycles can be changed anytime during the
first Fill Step. After the first Fill Step, all cycle key-
pad presses are ignored.
6. When a cycle is complete, the control displays
OPEN
DOOR
.
Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
101
Part No. F8619501ENR4
Summary of Contents for UCT020 series
Page 2: ......
