© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
13
9001001
Special Options in Run Mode
While the machine is running press the “Display
Temp” button.
Level:
2.5 cm: Water level in the bath. If the
machine is filling with water this value will
increase. If in a drain step this value will
decrease.
62°F:
The water temperature.
40rpm:
The measured rpm of the drum.
L:
Rotation direction of the drum
L (left), R (right)
Press the “Display Temp” button to go back.
Advance Mode
Press the “Advance” button to proceed to the next step
in the progam.
Chemical Hold Feature
Chemical supply injection can be paused. Refer to
section
Setup of the Chemical Hold Feature
in
Programming manual.
S01 C23 0:04:59
80°F High
S01 C23 0:04:59
80°F High
Level : 2.5 cm
62°F 40rpm L
