© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
7
512691R4
Before You Start
Tools
For most installations, the basic tools you will need
are:
Figure 1
NOTE: A 20.32 cm (8 in.) coin drawer is required
for coin operated MDC and NetMaster models.
Additional Security
Torx security screws are available (as optional
equipment at extra cost) for securing both lower access
panels to each dryer base. Order Part No. 62853.
A Torx bit, Part No. 282P4, is available (as optional
equipment at extra cost) for installing the Torx security
screws.
A Torx bit holder, Part No. 24161, is available (as
optional equipment at extra cost) to be used with the
Torx bit.
DRY2586N
1
Wrench
2
1/4 inch Driver
3
Screwdrivers
4
Level
5
Gloves
6
Teflon Tape
7
Duct Tape
8
Safety Glasses
4
5
1
7
2
3
8
6
Any disassembly requiring the use of
tools must be performed by a suitably
qualified service person.
W299
WARNING
