This installation manual describes how the Tornado PCI V.90 must be hooked up to your PC and
how the drivers must be installed.
It contains extensive information and a description of all the commands of the Tornado PCI V.90.
Check your components
Unpack your Tornado PCI V.90 fax/modem and check whether the components listed below are
present:
-
The Tornado fax/modem card.
-
A modular telephone cable to connect your fax/modem to the telephone line.
-
This manual.
-
Communication software
When you open the box, make sure that all of the components listed below are present and not
damaged.
Contact your dealer immediately if you encounter damaged components.
Using the Tornado PCI V.90
Installing the Fax/Modem
You will need the following for a complete data communication system:
-
Communication software
-
An activated telephone line and a telephone
-
An available PCI slot in your computer.
-
A microphone and a loud speaker for voice recording and play function with the
Voice option.
Installing the Fax/Modem PC card
The following instructions explain how to install the Tornado fax/modem in a PC or a in a
PC compatible computer. If you install the fax/modem in a different computer, consult the
manual that came with your computer or contact your computer dealer for instructions.
Tornado PCI V.90
Allied Data Technologies
5
