6. Hold the internal fax/modem above the slot you have selected, check whether the
connector is pointed down, and whether the cover attachment is in the correct position.
Carefully slide the fax/modem into
the slot by applying pressure to the
ends of the fax/modem.
Complete this procedure when the
connector is enclosed and fully
seated in the base of the computer.
7. If you have removed a screw from
the cover slot, use it to fasten the
fax/modem.
8. Use the screws from the system
casing to secure the casing of the
computer.
The modem is now hooked up
.
Tornado PCI V.90
Allied Data Technologies
7
