Height Adjustments
The seatback can be adjusted up and down on the sliding shell brackets or through the cane
brackets.
•
Cane brackets can be mounted in various positions depending on the canes on the chair, and
how much space is available for mounting. After setting these in the appropriate position the
back height can then be adjusted further by loosening the screws on the sliding bracket to
achieve the desired height.
Adjustable Air Foam Cushion
• Adjustable toggle is located on the bottom left hand corner of the back (when facing the front).
• Sit the user in the chair and allow them to sit back into the backrest, once in position turn the
air valve to close off the cushion.
•
Once a week, allow the back to fully inflate overnight with all valves open.
Accessories
•
PSIS Block – Corrects posterior pelvic tilt by supporting the sacrum at the PSIS.
•
Supplemental Lateral Supports - Provides additional support where desired when placed inside
the Icon Back shell.
• Cane Shims – each back comes with two sizes of shims as standard, to be used with back
canes less that 1” in diameter. A 1/8” shim is to be used with a 7/8” cane and ¼” shim is to be used
with a ¾” cane.
• Mounting spacer block for headrest.
