4
45-074, REV. 5/18
SECTION 2 MODEL NUMBER DESCRIPTION
Each clamp is identified by a model number and a serial number located on the name plate attached to the unit prior
to shipment. Long Reach’s model numbers are designed to describe how an attachment is equipped. The guide
below illustrates the information that is represented in its model number. Always include model and serial number
when ordering parts or requesting service information.
Series Model Number:
P
T
C
1
2
2
4
P
3
SERIES
PTC = Pipe Clamp
CAPACITY
12 = 12,000 lb
STD = Standard
P3J = Pin mounting to fit CAT truck
model DP115. Approximate pivot/
sideshift - 22"
Polyurethane covered swivel pads,
360° rotation
J
24 = Designed to handle
9" - 24" diamter pipe
