Foreword
The safe and effi cient operation of a winch requires skill
and alertness on the part of the operator. To develop the
skills required, the operator must:
•
Receive training in the proper operation of the winch
and the machine on which it is mounted.
•
Understand the capabilities and limitations of the
winch and the machine on which it is mounted.
•
Become familiar with the winch and the machine on
which it is mounted and see that they are maintained
in good condition.
•
Read and understand the SAFETY SUMMARY
and OPERATING PROCEDURES contained in this
Operating Manual.
In addition, a qualifi ed person experienced in the operation
of the winch must guide a new operator through several
load handling applications before the new operator
attempts to operate the equipment alone. It is the
employer’s responsibility to make sure that the operator
can see, hear, and has the physical and mental ability to
operate the equipment safely.
This Operating Manual contains basic information
necessary for the operation and maintenance of a winch.
Optional equipment is sometimes installed that can
change the characteristics described in this manual.
Make sure the necessary instructions are available and
understood before operating the winch.
Some of the components described in this Operating
Manual will NOT be installed on your winch. If you have
questions about any item on your winch or described in
this Operating Manual, contact your local winch dealer,
or contact Allied Systems Company:
Allied Systems Company
21433 SW Oregon Street
Sherwood, OR 97140 USA
Phone: 503-625-2560
Fax: 503-625-7269
E-Mail: marketing@alliedsystems.com
Also visit our website, www.alliedsystems.com, where
the most current copy of this manual is always available.
Foreword
i
Summary of Contents for W12E
