Patch 86222-27 For Rapier Switches
SHOW IP IGMP
43
Patch 86222-27 for Software Release 2.2.2
C613-10319-00 REV Z
Modified Command
SHOW IP IGMP
Syntax
SHOW IP IGMP [COUNTER] [INTERFACE=
interface
]
Description
This command displays information about IGMP, and multicast group
membership for each IP interface.
This enhancement includes the line “
Disabled All-groups ports
” on the output
of this command, as show in Figure 2 on page 43. Ports that are disabled have a
“#” symbol next to the port number.
Figure 2: Example output from the SHOW IP IGMP command.
Examples
To show information about IGMP, use the command:
SHOW IP IGMP
See Also
ENABLE IP IGMP ALLGROUP
DISABLE IP IGMP ALLGROUP
IGMP Protocol
--------------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 125 secs
Default Timeout Interval ......... 270 secs
Disabled All-groups ports ........ 1,5,7
Interface Name .......... vlan2 (DR)
IGMP Proxy .............. Off
Group List ..............
Group. 238.0.1.2 Last Adv. 172.50.2.1 Refresh time 34 secs
Ports 3,11,23
Group. 224.1.1.2 Last Adv. 172.50.2.1 Refresh time 130 secs
Ports 2,11,23
All Groups Last Adv. 172.50.1.1 Refresh time 45 secs
Ports 1#,11,23
Interface Name .......... vlan4 (DR)
IGMP Proxy .............. Off
Group List ..............
No group memberships.
--------------------------------------------------------------------------------
Table 26: New parameter in the output of the SHOW IP IGMP command.
Parameter
Meaning
Disabled All-groups ports
A list of ports that are prevented from behaving as IGMP all-
group ports.
