SNMP Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
55.5
Example
To display the counters for the SNMP agent, use the command:
awplus#
show counter snmp-server
Related commands
show snmp-server
outGenErrs
The number of SNMP PDUs that the SNMP agent has generated
with the value ‘genErr' in the error-status field. This is sent to the
SNMP manager to indicate that an exception occurred when
processing a request from the manager.
outGetRequests
The number of SNMP Get-Request PDUs that the SNMP agent
has generated.
outGetNexts
The number of SNMP Get-Next PDUs that the SNMP agent has
generated.
outSetRequests
The number of SNMP Set-Request PDUs that the SNMP agent
has generated.
outGetResponses
The number of SNMP Get-Response PDUs that the SNMP agent
has generated.
outTraps
The number of SNMP Trap PDUs that the SNMP agent has
generated.
UnSupportedSecLevel
s
The number of received packets that the SNMP agent has
dropped because they requested a securityLevel unknown or not
available to the SNMP agent.
NotInTimeWindows
The number of received packets that the SNMP agent has
dropped because they appeared outside of the authoritative
SNMP agent’s window.
UnknownUserNames
The number of received packets that the SNMP agent has
dropped because they referenced an unknown user.
UnknownEngineIDs
The number of received packets that the SNMP agent has
dropped because they referenced an unknown snmpEngineID.
WrongDigest
The number of received packets that the SNMP agent has
dropped because they didn't contain the expected digest value.
DecryptionErrors
The number of received packets that the SNMP agent has
dropped because they could not be decrypted.
UnknownSecModels
The number of messages received that contain a security model
that is not supported by the server. Valid for SNMPv3 messages
only.
InvalidMsgs
The number of messages received where the security model is
supported but the authentication fails. Valid for SNMPv3 messages
only.
UnknownPDUHandlers
The number of times the SNMP handler has failed to process a
PDU. This is a system debugging counter.