SNMP Commands
©2008 Allied Telesis Inc. All rights reserved.
55.6
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
show debugging snmp
This command displays whether SNMP debugging is enabled or disabled.
Syntax
show debugging snmp
Mode
Exec and Privileged Exec mode
Output
Example
To display the status of SNMP debugging, use the command:
awplus#
show debugging snmp
Related commands
debug snmp
show running-config snmp
This command displays the current configuration of SNMP on your device.
Syntax
show running-config snmp
Mode
Exec and Privileged Exec mode
Output
Example
To display the current configuration of SNMP on your device, use the command:
awplus#
show running-config snmp
Related commands
show snmp-server
Snmp (SMUX) debugging status:
Snmp debugging is on
snmp-server contact AlliedTelesis
snmp-server location Philippines
snmp-server group grou1 auth read view1 write view1 notify view1
snmp-server view view1 1 included
snmp-server community public
snmp-server user user1 group1 auth md5 password priv des password