Ping Polling Commands
©2008 Allied Telesis Inc. All rights reserved.
63.10
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
normal-interval
This command specifies the time period between pings when the device is reachable.
The
no
parameter resets the time period to the default value of 30 seconds.
Syntax
normal-interval <1-65536>
no normal-interval
Mode
Ping Polling mode
Examples
To specify a time period of 60 seconds between pings when the device is reachable, use the
command:
awplus(config-ping-poll)#
normal-interval 60
To reset the interval to the default value of 30 seconds, use the command:
awplus(config-ping-poll)#
no normal-interval
Related Commands
critical-interval
fail-count
ping-poll
sample-size
show ping-poll
timeout
up-count
Parameter
Description
<1-65536>
Time in seconds between pings when the target is reachable.
Default:
30