Stacking Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
65.5
reload
This command currently halts and perform a cold restart on the device where the command is
executed.
Syntax
reload [stack-member][1-8]
Mode
Privileged Exec mode
Usage
This command currently halts and perform a cold restart on either a specific device or a whole
device stack.
For stand alone devices:
Executing this command will reload the device. Before the reload occurs, you will receive a
confirmation request saying: "reboot system? (y/n):".
For stacked devices:
To reload a selected device within a stack, you enter the
stack-member
parameter and
specify the stack member ID (1 to 8) of the device you want to reboot. Before the reload
occurs, you will receive a confirmation request saying: "reboot stack-member <specific stack-
member ID> system? (y/n):".
If the specified stack member ID does not exist in the current stack, the command will be
rejected.
Executing this command with no parameters specified, will reload all devices in the stack.
Before the reload occurs, you will receive a confirmation request saying: "Are you sure you
want to reboot the whole stack? (y/n):".
Examples
To reload the entire stack:
Related Commands
reload
Parameter
Description
reload
Halt and perform a cold restart
stack-member
Reload will only operate on a specific stack member
<1-8>
The ID of the stack member that needs to be reloaded
awplus#
reload
Are you sure you want to reboot the whole
stack? (y/n): y
awplus#
y
To reload a specific stack member:
awplus#
reload stack-member 3
reboot stack-member 3 system? (y/n): y
awplus#
y