Stacking Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
65.27
type stack neighbour
This command configures a trigger to be activated at a stacking neighbour join event and can
only be entered on the stack master.
Syntax
type stack neighbour {join|leave}
Mode
Trigger Mode
Examples
To configure trigger 86 to activate when stack neighbour join event occurs:
Related Commands
trigger
type stack master-fail
type stack xem-stk
Parameter
Description
type
Configure a particular type of trigger
stack
Virtual Chassis Stacking (VCS)
neighbour
The neighbour event to activate the trigger
join
Neighbour join event
leave
Neighbour leave event
awplus#
configure terminal
awplus(config)#
trigger 86
awplus(config-trigger)#
type stack neighbour join