System Configuration and Monitoring Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
8.27
Figure 8-10: Example output from the
show system
command for a stacked configuration
Example
To display the system information for a single switch, or a whole stack, use the command:
To display the system information of stack member 3, use the command:
Related Commands
remote-command
show system environment
Stack System Status Tue Aug 7 05:25:09 2007
Stack member 1:
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 270 x900-24XT B-0 41FY68006
Expansion 272 Bay1 XEM-1XP B-0 41AR65001
Expansion 285 Bay2 XEM-STK A-0 M1L174004
PSU 212 PSU1 AT-PWR01-AC F-1 3F4AAA3
Fan module 214 PSU2 AT-FAN01 F-1 3F0A72D
--------------------------------------------------------------------------------
Memory: DRAM: 514460 kB Flash: 31.0MB Used: 25.1MB Available: 5.9MB
--------------------------------------------------------------------------------
Environment Status: Normal
Uptime: 0 days 04:26:02
Stack member 2:
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 271 x900-24XS A-2 41HF6900U
Expansion 272 Bay1 XEM-1XP A-0 41AR5B003
Expansion 285 Bay2 XEM-STK (nul M1L17400T
PSU 212 PSU1 AT-PWR01-AC F-1 3F48ACA
Fan module 214 PSU2 AT-FAN01 F-1 3E485D2
--------------------------------------------------------------------------------
Memory: DRAM: 514460 kB Flash: 31.0MB Used: 25.2MB Available: 5.8MB
--------------------------------------------------------------------------------
Environment Status: Normal
Uptime: 0 days 00:01:14
Bootloader version : 1.0.8
Current software : r1-5.2.1-20070807-2.rel
Software version : 5.2.1 20070807-2
Build date : Tue Aug 7 09:27:05 NZST 2007
Current boot config: flash:/default.cfg (file exists)
Territory : usa
System Name
System Contact
System Location
awplus#
show system
awplus#
remote-command 3 show system