Switching Commands
©2008 Allied Telesis Inc. All rights reserved.
15.22
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
Port configurations:
lport 3 macStatus: 0x01000004 value: 0x00000004
macCtrl: 0x01000000 value: 0x11269419
macCounters: 0x01010000 value: 0x00000000
portControl: 0x02003000 value: 0x0010C680
portVid: 0x02003004 value: 0x00000001
brdByteLimit: 0x02003008 value: 0xFFFF0000
brdByteWindow: 0x0200300C value: 0x00FFFF00
protoVidBased: 0x02003800 value: 0x00010001
rxBufLimit: 0x0301100C value: 0xFA404001
flowCntrlThr: 0x0301000C value: 0xFA404001
show port-security interface
Shows the current configuration and the switch port status.
Syntax
show port-security interface <
port>
Mode
Exec and Privileged Exec Mode
Example
To see the port-security status on port1.0.1, use command:
awplus# show port-security interface port1.0.1
Port Security configuration
Security Enabled
: YES
Port Status
: ENABLED
Violation Mode
: TRAP
Aging
: OFF
Maximum MAC Addresses
: 3
Current Learned Addresses
: 1
Lock Status
: UNLOCKED
Security Violation Count
: 0
Last Violation Source Address: None
Parameter
Description
show
Show running system information
port-security
Port Security
interface
Interface
<
port
>
The port to display information about. The port may be a switch port (e.g.,
port1.1.4), a static channel group (e.g., sa3), or an LACP channel group
(e.g., po4).