Routing Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
26.7
Examples
To display the static routes in the RIB, use the command:
awplus#
show ip route database static
Related Commands
maximum-paths
show ip route
show ip route summary
This command displays a summary of the current RIB entries.
Syntax
show ip route summary
Mode
Exec mode and Privileged Exec mode
Output
Figure 26-3: Example output from the
show ip route summary
command
Examples
To display a summary of the current RIB entries, use the command:
Related Commands
show ip route
show ip route database
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4
Route Source Networks
connected 5
ospf 2
Total 8
FIB 2
awplus#
show ip route summary