OSPF Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
30.65
show ip ospf interface
Use this command to display interface information for OSPF.
Syntax
show ip ospf interface IFNAME
Mode
Privileged Exec mode and Exec mode
Output
Figure 30-19: Example output from the
show ip ospf interface IFNAME
command
Examples
awplus#show ip ospf interface port1.0.2
Parameter
Description
IFNAME
An alphanumeric string that is the interface name.
VLAN1 is up, line protocol is up
Internet Address 1.1.1.1/24, Area 0.0.0.0, MTU 1500
Process ID 0, Router ID 33.33.33.33, Network Type BROADCAST,
Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1, TE Metric 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in 00:00:02
Neighbor Count is 0, Adjacent neighbor count is 0
Crypt Sequence Number is 1106347721
Hello received 0 sent 1, DD received 0 sent 0
LS-Req received 0 sent 0, LS-Upd received 0 sent 0
LS-Ack received 0 sent 0, Discarded 0