IGMP Multicast Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
34.21
ip igmp ssm-map static
Use this command to specify the static mode of defining SSM mapping. SSM mapping statically
assigns sources to IGMPv1 and IGMPv2 groups to translate such (*,G) groups’ memberships to
(S,G) memberships for use with PIM-SSM.
Use the
no
parameter with this command to remove the SSM map association.
Syntax
ip igmp
ssm-map static
<access-list>
A.B.C.D
no ip igmp
ssm-map static
<access-list>
A.B.C.D
Mode
Global Config mode
Usage
This command applies to interfaces configured for IGMP.
Examples
This example shows how to configure an SSM static mapping for group-address 224.1.1.1.
Related Commands
ip igmp ssm-map enable
Parameter
Description
<access-list>
<1-99> Access-list number
<1300-1999
Access-list number (expanded range).
A.B.C.D
Standard IP access-list name.
awplus#
configure terminal
awplus(config)#
ip igmp ssm-map static 1 1.2.3.4
awplus(config)#
access-list 1 224.1.1.1 0.0.0.0