802.1x and RADIUS Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
42.5
dot1x quiet-period
Use this command to set the quiet-period time interval. Use the
no
parameter with this
command to set the configured quiet period to the default (60 seconds).
When a switch cannot authenticate a client, the switch remains idle for a quiet-period interval
of time, then tries again. By administratively changing the quiet-period interval, by entering a
lower number than the default, a faster response time can be provided.
Syntax
dot1x quiet-period <1-65535>
no dot1x quiet-period
Mode
Interface mode
Examples
awplus#configure terminal
awplus(config)#interface port1.0.1
awplus(config-if)#dot1x quiet-period 200
dot1x reauthentication
Use this command to enable reauthentication on a port.
Syntax
dot1x reauthentication
Mode
Interface mode
Examples
awplus#configure terminal
awplus(config)#interface port1.0.1
awplus(config-if)#dot1x reauthentication
Parameter
Description
<1-65535>
Seconds between the retrial of authentication.