AT-FS750/24-41 Web User Interface Manual
5-4
Parameter
Description
IP Address
IP address of authorized manager
Subnet Mask
Subnet mask of the authorized IP address
Port List (Incoming)
Interface of the authorized administrator is allowed to connect to
VLANs Allowed
VLAN ID of the authorized administrator is allowed to connect to. It can be a
single VLAN ID from 1 to 4094, a range of VLAN IDs separated by a hyphen
(-) ,or a series of non-continuous numbers divided by a comma (,)
Service Allowed
Services that authorized administrator are allowed to access. It includes
SNMP
,
TELNET
,
HTTP
(Web),
HTTPS
(SSL),
SSH
services. Select
ALL
will
cover all services.
Click
ADD
to submit the changes and the
Reset
button will clear the information inputed. Select and click
Delete
to remove an existed account.
SNMP
SNMP User/Group Table Configuration
This page is to configure the SNMP user and group information.
Figure 14 – System > SNMP > User/Group Table
Parameter
Description
User Name
SNMP user name
Group Name
SNMP group name
SNMP Version
Specify the SNMP version to be used, which can be
v1
,
v2c
, or
v3
. Select
„
encrypted’
if the encryption for user authentication is needed. Once the
encryption is enabled, then can set the authentication and privilege algorithm
and passwords.
Auth-Protocol
Specify the authenticaion algrotithm from
MD5
or
SHA
algorithem, and the
password.
Priv-Protocol
Specify the priviledge encrption algrotithm from
DES
or
none
, and the
password.
Click
ADD
to submit the changes and the
Reset
button will clear the information inputed. Select and click
Delete
to remove an existed entry.
SNMP Group Access Table Configuration
This page is to configure the access settings of a SNMP group.
